Radio locked by code
After the power supply is disconnected, the radio requires a code entry, and after the entry limit is exceeded it becomes locked. We unlock the unit and can set a new code after checking the module.
Is the radio locked by code, freezing on the logo, or having backlight problems or a white screen? We repair the Zenec ZE-NC5010FC designed for Opel Corsa D, Astra H and Zafira B. Send just the module by courier and we will check it at our workshop.

Written repair warranty
Quote for approval before repair
Courier shipping from anywhere in Poland
Quick repair quote
The Zenec ZE-NC5010FC is a radio-navigation unit by Zenec designed for Opel Corsa D, Astra H and Zafira B from 2007–2009. It has a 7-inch touchscreen and steering wheel control support.
The unit has a touchscreen panel, CD drive, Bluetooth module and DVB-T tuner. If you have the label with the part number, send a photo of it with your enquiry and we will verify the model.
In your enquiry, describe the symptoms: code lock, freezing on the logo, no backlight or a white screen. Send only the removed module to the workshop.
The symptoms help describe the problem. We confirm the cause after checking the module.
After the power supply is disconnected, the radio requires a code entry, and after the entry limit is exceeded it becomes locked. We unlock the unit and can set a new code after checking the module.
The radio starts up to the logo stage and then stops working. After checking the module, we determine whether the cause is software or another fault, and we propose the repair scope.
The display has no backlight or shows a completely white screen. We confirm the cause after checking the module and, if necessary, update or reset the software.
After receiving the removed module, we check the code lock and the reported symptoms. We confirm the scope of work and the price before starting the repair.
If necessary, we unlock the radio and can set a new code. In the case of software faults, we update or reset the device software.
After repair we can update the system, test the touchscreen and CD drive, and check operation. The unit is returned securely packaged.
We repair your module instead of replacing it with another one. We confirm the scope of work and the price after checking it.
You do not need to bring the vehicle in. Describe the problem and we will help you work out what to remove and send. After inspection, you will receive a quote for approval — only then will we start work.
01
Write what is happening in the vehicle, state the make, model and year. Add a photo of the device, the error screen or the nameplate sticker, if you have one. On that basis, we will initially assess whether we can help.
02
Not sure whether to remove the radio, screen, amplifier or another unit? We will advise which component to check, how to prepare it for shipping and how to pack the parcel safely.
03
In the workshop we carry out diagnostics, confirm the source of the problem and define the scope of work. We send a quote for approval. We only start work after your approval.
04
We remove the cause of the fault, test the device and send it back safely packed for refitting. Every repair we carry out is covered by a warranty.
Answers to questions about the Zenec ZE-NC5010FC.
Yes. We unlock the radio and can set a new code. We confirm the scope of work and cost after checking the removed module.
You do not need to do it yourself. During the repair we can update the radio software, and then we test the unit before sending it back.
No. If you decide not to proceed, or if the unit cannot be repaired, or the fault lies outside it, diagnosis and return shipping are free of charge.
This time we were dealing with the popular Zenec ZE-NC5010FC model. Today we will describe the most common faults, and also say a little about the software update.