Back to “Scania”

Scania AUS3 TIP Bosch

Turn the key and there is silence in the cab — a black screen or no response from the radio? We repair the Scania AUS3 TIP Bosch radio-navigation unit from Scania P, G and R series. Send just the module by courier and we will check it at our workshop and confirm the scope of repair.

Get a repair quote

Scania
Scania AUS3 TIP Bosch

Written repair warranty

Quote for approval before repair

Courier shipping from anywhere in Poland

Quick repair quote






    How to identify Scania AUS3 TIP?

    Get a repair quote

    AUS3 TIP is a Bosch radio-navigation system used in Scania P, G and R series, depending on the dashboard configuration. The units come from around 2013–2017.

    Check the white label: the name Scania TIP or Scania AUS3 V3 TIP and the Bosch Car Multimedia logo. The part numbers shown on the label are 7 620 000 049 / 057 / 058. On the front panel there is a 5-inch touchscreen, 12 buttons and 2 knobs; above the screen is the CD slot, and under the flap on the right is the micro-SD card reader with the map.

    Before submitting, take a photo of the label and provide the part number. Send only the removed module to the workshop; we check the module in the workshop, not the vehicle.

    What happens to your Scania AUS3 TIP radio?


    The symptoms help describe the fault. We confirm the cause after checking the removed module.

    Black screen, no response

    After turning the key, the screen is black, the buttons do not respond and there is no sound. This may end with the unit failing to start at all; we determine the cause after checking the module and repair the main board according to the agreed scope.

    The radio kept resetting, then it failed

    At first there may have been occasional restarts, and then the radio stopped switching on. We confirm the cause after checking the module; we refurbish the main board circuits and replace damaged components.

    It switched off while driving

    The radio may suddenly switch off while driving and not respond after an attempt to restart it. We check the module in the workshop, determine the cause and propose the repair scope.

    It crackled in the speakers before it failed

    Hissing or strange noises before the sound is lost may indicate a short in the TDA power amplifier on the speaker side. We confirm this after checking the module and, if needed, repair the damaged circuits.

    Get a repair quote

    How do we repair Scania AUS3 TIP?


    Module inspection

    After receipt, we diagnose the removed module in the workshop and confirm the scope of work and the price before starting the repair.

    Board refurbishment

    We refurbish the main board and replace damaged components, removing corrosion or repairing circuit damage.

    Test and return

    After repair we test the module, pack it safely and send it back. We only start the repair after your approval of the scope and price.

    Repair or a used unit?

    A used radio from the market may have an uncertain origin and condition. We refurbish your unit, and we provide a written warranty for the repair.

    Get a repair quote

    Slide the table sideways to see all columns.

    ParameterUsed, from the open marketRepair at OEMatic
    Working-order warrantyStartup warrantyWritten warranty
    Reliability of operationUncertain origin and conditionModule test after repair
    The repair applies to the removed module.

    How does mail-in repair work
    step by step?

    You do not need to bring the vehicle in. Describe the problem and we will help you work out what to remove and send. After inspection, you will receive a quote for approval — only then will we start work.


    01

    Describe the problem and show the device

    Write what is happening in the vehicle, state the make, model and year. Add a photo of the device, the error screen or the nameplate sticker, if you have one. On that basis, we will initially assess whether we can help.

    02

    We will help you work out what to send

    Not sure whether to remove the radio, screen, amplifier or another unit? We will advise which component to check, how to prepare it for shipping and how to pack the parcel safely.

    03

    We confirm the fault and quote for the work

    In the workshop we carry out diagnostics, confirm the source of the problem and define the scope of work. We send a quote for approval. We only start work after your approval.

    04

    We repair, test and return

    We remove the cause of the fault, test the device and send it back safely packed for refitting. Every repair we carry out is covered by a warranty.


    Google

    Rating 5 out of 5. GOOGLE REVIEW

    Many thanks to the entire OEMatic team for repairing the radio in my Lexus CT.
    Professional and reliable service. I can wholeheartedly recommend this workshop!
    Problem: black screen, no working radio, no interaction with the radio at all.

    Jan Bał

    Rating 5 out of 5. GOOGLE REVIEW

    Highly recommended! My OEM JBL amplifier from a Toyota (CHR, 2017) suffered a short circuit, and other audio workshops would not agree to repair it. Here the problem was solved extremely quickly. They received the parcel on Monday, and by Thursday the repaired unit was back with me. Excellent communication at every stage, and most importantly – the price includes a 24-month warranty.
    Complete professionalism!

    Mateusz Janiczek

    Rating 5 out of 5. GOOGLE REVIEW

    A service absolutely worth recommending. After years of problems with the infotainment head unit in my Skoda Superb constantly freezing and resetting, the MIB was finally repaired. The main dealer could only offer a replacement with a new unit for 3500 eur (!), other car audio companies could not help, and OEMatic carried out the repair in 1 day.

    Piotr Nofski

    Rating 5 out of 5. GOOGLE REVIEW

    I recommend them wholeheartedly….I don’t know how they did it, but they decoded the radio from an Iveco Daily 2020 faster than it takes to pack the parcel with the radio…One workshop promised a lot, but failed and said the radio was only fit for scrap. I highly recommend them — complete professionalism and a good price. Best regards.

    autoodnowa u.

    Rating 5 out of 5. GOOGLE REVIEW

    I can definitely recommend them. Mr Tomasz repaired my BOSE amplifiers, RNS, NTG navigation units and more. Always 100% successful, fantastic customer approach and a convenient online platform for placing repair orders.

    Piotr Brzezina

    Rating 5 out of 5. GOOGLE REVIEW

    I recommend OEMatic — only 3 days passed from sending the radio to the workshop and having it fitted back in my car.
    The radio from a Mercedes ML W164 2007 NTG2 BE 6089 had its fault diagnosed extremely quickly, and the repair was carried out just as fast.
    Communication with Mr Tomasz was excellent, and updates from the workshop on the progress of the repair were sent promptly. This is definitely a workshop other people can learn from.
    An obvious 5 stars from me.

    Adrian

    Rating 5 out of 5. GOOGLE REVIEW

    I had a problem with my Audi A3 8V, with no sound from the factory multimedia player. The guys solved the problem in a few days. I recommend them!

    Rafał Niżnik

    Rating 5 out of 5. GOOGLE REVIEW

    Service and expertise 100%. Thank you for helping with my RNS 315 radio. Highly recommended!

    Michał Tuz

    Rating 5 out of 5. GOOGLE REVIEW

    VW Touran radio, I sent it to the company because the reversing camera was not working and the radio would not turn on. Sent by courier. Diagnosis: no faults. (the fault needs to be looked for elsewhere) The radio was sent back quickly and the company did not charge anything, not even for the return postage. There probably aren’t many honest companies like this left here in Poland. Many thanks.

    John Doe

    Rating 5 out of 5. GOOGLE REVIEW

    Definitely recommended. Very fast repair and very good, speedy communication. Information was available at every stage of the repair request process — an online repair management system. The unit (radio) was already meant to be written off and replaced with another used one. Fortunately, I accidentally found the OEMatic blog while looking for a replacement, and it saved me from replacing it with another used unit, which would have been a loss for the appearance (the fronts of the replacements I found were not in such good condition, and all of them were older than my unit from pre-facelift models); the newer ones were more expensive than the repair. So that’s a plus too.

    Artur Kozubski

    Rating 5 out of 5. GOOGLE REVIEW

    RNS 315 radio with faulty Bluetooth. The radio sounds better than new. Others gave up on the repair, OEMatic handled it efficiently and quickly without any problems. We need more professionals like this. Thank you for the repair.

    Krzysztof Szaboń

    Rating 5 out of 5. GOOGLE REVIEW

    Professionally carried out repair of a factory VW radio, excellent communication, complete professionalism. May there be more companies like this in Poland.

    Sławomir Pobłocki

    Rating 5 out of 5. GOOGLE REVIEW

    I left a Honda Jazz radio panel for repair. In addition to the radio, the guys also repaired the CD player at the same price, even though I hadn’t asked them to. I also received spare bulbs for the button backlighting. Very friendly and professional, the radio and player work flawlessly. I recommend them with a clear conscience. Such expertise is rare nowadays.

    b nowicki

    Rating 5 out of 5. GOOGLE REVIEW

    Highly recommended. ZENEC radio after the pin was blocked. Code removed. Radio works, old pin. Fast, 1 day. Telephone contact without any problem. Parcel safely packed.

    Stefan Nowak

    Rating 5 out of 5. GOOGLE REVIEW

    For a long time I’d been battling an annoying problem in my VW Passat B8 — the car radio kept losing sound. Fortunately, I found OEMatic Car Media Lab and it was a perfect choice!
    From the first contact it was clear there was professionalism and huge knowledge of factory audio systems. Quick diagnosis and an even quicker (and most importantly: EFFECTIVE!) repair! The result? The radio plays crystal clear, with no dropouts or interruptions. You can tell the fault was removed at the source, not just temporarily masked.
    If you have any problems with factory audio, navigation or the radio in your car (especially VW, Audi, Skoda!), I definitely recommend OEMatic Car Media Lab. True experts!

    Łukasz Puziak

    Rating 5 out of 5. GOOGLE REVIEW

    The Harman-Kardon amplifier in my BMW F33 was flooded, so I decided to hand it over to OEMatic. A quick check to see whether it could be saved — yes! it could! A few days later the amplifier was back with me after repair.

    For a moment I also had doubts whether only the amplifier had been damaged by the flooding, because I lost the ability to set the time and information such as instant fuel consumption or average fuel consumption disappeared; after a phone call I was told that this can happen because of a break in the car’s CAN circuit due to the amplifier being absent.

    The theory proved correct, and fitting the already repaired amplifier helped and all the functions returned.

    I hope the amplifier will serve for a long time to come and without faults.

    I honestly RECOMMEND IT!

    Michal Marecik

    Rating 5 out of 5. GOOGLE REVIEW

    A great company, they will help you in any situation when it comes to navigation.
    Two companies from the Małopolskie region where I live suggested replacing the unit; at the authorised service centre the fault repair would cost 1400 ,- and they helped me fix it, and over the phone 😃

    Miroslaw Syty

    Rating 5 out of 5. GOOGLE REVIEW

    The content of the reviews I read quickly convinced me to have my unit repaired at OeMatic. I expected the highest quality of service at every stage and that is exactly what I received. After the phone call I received all the information needed for shipping by text message. As soon as the workshop received the parcel with the radio, I got a phone call, we agreed the details, I confirmed the price and the repair began. In the afternoon of the next day I was informed that the repair had been completed, I settled the bill and the radio was back with me after 4 days. It seems there is no room for even the slightest shortcoming in this company (such as a delay with a text message).
    For me, this is the highest quality.
    Thank you very much for the repair and I wish you success🙂

    Dawid

    Ania Łyszkowska

    Rating 5 out of 5. GOOGLE REVIEW

    Professional and reliable service. The fault was initially diagnosed remotely, and the repair cost estimated. The unit was delivered to the workshop and collected remotely by courier. Everything was fast, straightforward and efficient. The car audio came back to life 🙂
    I can recommend them with a clear conscience.

    Bartłomiej Machnik

    Rating 5 out of 5. GOOGLE REVIEW

    Five stars is not enough..
    OEMatic solved the problem with a non-working USB port (motherboard repair) in the factory navigation system from a Kia Sportage in express mode. Highly recommended.

    KJ

    Before you send Scania AUS3 TIP

    A few answers to help you prepare your request.

    The radio does not switch on at all. Can it be repaired?

    We accept this radio for repair, provided the module has not been opened before. We establish the cause at the workshop, refurbish the main board and replace the damaged components; we start the repair after your approval.

    What could cause the radio to stop working?

    This may be due to damage to the power section, moisture and corrosion of the main board, or a short circuit in the TDA power amplifier on the speaker side. We determine the exact cause after checking the module.

    How can I tell that this is my model?

    Check the white label: Scania TIP or Scania AUS3 V3 TIP and the Bosch Car Multimedia logo. Part numbers are 7 620 000 049 / 057 / 058. If you're unsure, send us a photo of the label.

    Will I be charged for diagnostics if I decide not to go ahead?

    If you decide not to proceed, the unit cannot be repaired, or the fault lies outside the module, diagnosis and return shipment are free of charge. We only start the repair after approval of the scope and price.

    See case studies for this unit